Showroom :
Electronic fire bell series
                                
1. Drill a hole of Dia. 60 mm on panel.
2. Insert the front body into the hole.
3. Fit the back casing to the front body from other side of the panel, then screw them tightly by the attached three screws.
                               
Caving-in Ceiling type

--->

--->

1. Drill a hole of Dia. 2.5" on ceiling.
2. Put the longer fixing legs into the hole.
3. Push the unit and let the shorter caving-in legs out side of the hole.
4. Push the unit onto the hole, the unit will just be fixed on the surface of the ceiling flatly as the neatest & most beautiful fire bell.
Waterproof Fire Alarm with Strobe and Sweep Tone
> Replaces traditional mechanical fire alarm bells
> Combines strobes to strengthen alarm functions
> Special audio alarm effect increases effectiveness of fire warning
> Waterproof, easy to install design
> Input : 24VDC ( 12~30V DC )
> Sound output : 100 +/- 5 dB ( at 24V DC, 1M )
> Strobe : 8,000mcd, 6pcs. Super bright LED
> Tone : Harmonic bell sound or Sweep Tone
> Operating current (at 24V DC) :
22mA ( Bell only )
50mA ( with strobe )
> Color: Red
> Safety/Quality Approval : CE
Previous